INDUSTRY
Construction Equipment Lubricants & Oils Supplier
The Anglomoil Range provides the complete Construction machinery and equipment solution for fixed and mobile assets including, compressors, pumps, hydraulic systems, gear sets, bearings, chain drives, earthmoving equipment and pneumatic tools.
Product Certifications
No results found.
Bio Mould Oil has been specially formulated using biodegradable ingredients to ensure clean concrete release from steel, aluminium, plywood or composite forms. It minimises ...
Provac 100T is a high performance Vacuum oil with low volatility made from high quality Virgin mineral base oil and fortified with PTFE to enhance load carrying capacity for ...
Synvac 100T is a high performance Vacuum oil with especially low volatility as it is based on high performance synthetic oil and fortified with PTFE to enhance load carrying ...
Anglomoil Rock Drill Oils are blended from selected mineral oils specially compounded to provide good lubricity, inhibit corrosion as well as emulsifiers and tack additives.
Anglomoil BIOPAG GO is a fully formulated polyalkylene glycol (PAG) based synthetic high performance gear lubricant. BIOPAG GO is formulated with an advanced additive system ...
Anglomoil Ammonia Refrigeration Fluid is a mineral ISO 68 high performance compressor lubricant based on severely hydrocracked, isodewaxed base oil. Anglomoil Ammonia ...
The Anglomoil Hydrovane & Reciprocating Compressor oil is designed to meet stringent requirements of the major compressor manufacturers. They use only the best additive ...
A mineral oil suitable for rotary compressors, turbines and hydraulic applications.
Anglomoil compressor fluids are made from synthetic hydrocarbon PAO and special additive packages which make them ideal for lubricating rotary compressors.
Anglomoil System Cleaner is a formulated synthetic system cleaner. Its primary use is to quickly clean systems where sludge and varnish is present. The product is miscible ...
Anglomoil BIOPAG CL 46 Is a Rapidly Biodegradable air compressor lubricant and has been specially designed for use in rotary screw air compressors. BIOPAG CL air compressor ...
Contram CB-3 is Formaldehyde free and high alkaline to buffer pH of existing fluid dilution. It is a concentrated metalworking fluid system cleaner designed for use during ...
Lube Guide
Product search
Search Our Range
Search
Quick Search
Drill Down
SEARCH PRODUCTS
Featured Products
RM 100 15W40 CI-4
RoadMaster (RM) 100 SAE 15W40 mineral diesel engine oil meets the API CI-4 / SL specification, Mack Trucks EO-N and Cummins CES 20076, 20077 and 20078 specifications. RoadMaster 100 is suitable for use in all European heavy duty diesel engines complying with the latest Euro 4 exhaust emission legislation.
SM 600 15W40 CK-4
SeaMaster (SM) 600 SAE 15W40 has been formulated in group II mineral base oils and advanced chemistry to meet API CK-4 / SN / SM. SM 600 has been specifically formulated to meet the requirements of EPA 2007 compliant diesel engines equipped with after treatment devices such as diesel oxidation catalysts and particulate filters. This lubricant meets the most severe international specifications for diesel and petrol engine lubricants.
RM 600 15W40 CK-4
RoadMaster 600 SAE 15W40 has been formulated in group II mineral base oils and advanced chemistry to meet API CK-4 / SN / SM. RoadMaster 600 has been specifically formulated to meet the requirements of EPA 2007 compliant diesel engines equipped with after treatment devices such as diesel oxidation catalysts and particulate filters. This lubricant meets the most severe international specifications for diesel and petrol engine lubricants.
RM Gold FEO 10W30
RoadMaster (RM) Gold FEO (Fuel Economy Oil) SAE 10W30 is formulated as a semi-synthetic lubricant with the latest additive technology to meet API SP/CF, ILSAC GF-6A and API Resource Conserving Petrol Engine Lubricant specifications which provide excellent engine protection for the modern car specifying that grade of oil. It also improved turbocharged protection for engines where turbocharged are fitted.
RM Titanium Plus 5W30 & 5W40
RoadMaster Titanium Plus SAE 5W30 & 5W40 is an Ultra High performance synthetic passenger car engine oil blended to today’s most advanced light diesel and petrol engine lubricant specifications.
RM Transmission LS SAE 90 & 140
RoadMaster Transmission LS Gear Oils SAE 90 and 140 are high performance extreme pressure gear oils containing friction modifiers. Designed for use in limited slip differentials, particularly those of the “cone clutch” design, to provide effective lubrication and eliminate chatter and ‘squawk’ from the friction clutches and extended life of these units. Suitable for most truck and car limited slip differentials.
SM Four Stroke SAE 10W40 FC-W
SeaMaster (SM) Four Stroke (4ST) SAE 10W40 is a semi-synthetic marine engine oil formulated with the latest additive technology for use in four-stroke petrol fuelled engines in marine applications.
SM Super Two Stroke Outboard TC-W3
SeaMaster (SM) Super Two-Stroke (2ST) Outboard Oil is a mineral two-stroke motor oil, suitable for high-performance water-cooled engine and for air-cooled engines. The oil has a viscosity of about SAE 40 but it is diluted with a solvent to facilitate mixing and dispersion in the fuel.
AM UTTO Ultra 10W30
AgriMaster (AM) UTTO Ultra SAE 10W30 is a premium multi-functional universal tractor transmission oil (UTTO) for use in transmissions, final drives and hydraulic systems of modern farm and industrial wheel and crawler tractors and off-road equipment where fluids meeting major UTTO specifications are recommended.
GM Chain & Bar Oil
GardenMaster Chain & Bar Oil is a premium chain oil made with mineral oils, friction modifiers, anti-wear additives and tackifier. It is a high-performance product suitable for chains and bars of power chain saws. Additive system protects the chain, bar and sprockets from wear and its tacky nature reduces fling-off from the chain. Rust inhibited. Recommended for conveyer system chains and bars and chains of high performance professional power chain saws. Suitable for use in most lubrication systems.
Premium Hydraulic Oil
Premium Hydraulic Oil is a high performance Hydraulic oil made from high quality Group 2 mineral oil and the latest technology to meet the most demanding industrial specifications including high speed, high temperature paper machines.
Inplex 2163-220 Grease NLGI No.2 & 3
A marine service and industrial grease built upon calcium sulphonate complex base and high viscosity base oil. Inplex 2163-220 is the ideal lubricant for severe industrial applications, eg. pulp mills, steel mills and as a marine deck grease. Working temperature up to 150°C and a high load capacity.
Heatrans Oil
Anglomoil Heatrans Oil is blended from high quality mineral base oils fortified with an advanced additive system. This combination of materials provides superior performance in indirect closed heat transfer systems.
Mould Release Oil
Low viscosity release agent for extruded clay bricks and general purpose application for wood and steel concrete forms. Balanced chemistry ensuring excellent release and surface finish properties.
Turbine Oil Range
Anglomoil Turbine Oil range represents the next evolution in high-performance turbine oils, designed from the ground up to perform under the extreme conditions of modern high-efficiency turbines. The base oil and additive systems have been carefully formulated to offer outstanding long-term wear performance, extended oil life, and resist varnish and sludge formation even under cyclic loading.
FM Synthetic Compressor Oil
FoodMaster (FM) Synthetic Compressor Fluids are made from Polyalphaolefins (PAO) and additives packages that have been NSF H-1 registered, where incidental food contact can occur. FM Synthetic Compressor Oil is specifically recommended for use in rotary compressors where the NSF H-1 may be necessary.
FM Synthetic Heat Transfer Oil (HTO)
FoodMaster (FM) Heat Transfer Oil (HTO) ISO 32 is made only from synthetic hydrocarbons (PAO) and a specialised additive package. It is NSF H-1 listed for use in food processing machinery where incidental food contact can occur, and approval is required.
Slideway Oil
Anglomoil Slideway Oil series are high performance slideway lubricants based on solvent refined mineral oils.
Pro EPT Spray Lubricant (Aerosol)
PRO EPT spray lubricant has been formulated with the latest PTFE (Polytetrafluoroethylene) and polymer technology. Blended with premium anti-wear, anti-corrosion and moisture displacing additives means PRO EPT spray lubricant is able to outperform rival products with ease, making this all new spray lubricant a product with unlimited uses.
RM Coolant Engine Concentrate – Green
RM Coolant Engine Concentrate - Green is a Ethylene Glycol based Anti-freeze, anti-boil, anti-corrosion coolant for use in engine cooling systems
